7Y-5465 is a24V rotary console switch
The Cat7Y-5465rotary switch has45.6mm diameter,186.96mm overall length,100mm wire length and anM12mounting thread. It controls console electrical functions and belongs on a switch purchase line.
| Field | 7Y-5465 |
|---|---|
| Rating | 24V |
| Body diameter | 45.6mm |
| Overall length | 186.96mm |
| Wire length | 100mm |
| Mounting thread | M12 |
7Y-5500 is a legacy control-group identity
The Cat7Y-5500control-group entry is associated with older320-A/325-A/330-Aexcavator variants and uses anABSplastic construction field. The installed group number and plugs identify the replacement task; the namealone does not describe an engineECU.
Throttle drivers and engine controllers have separate codes
KHR1885 is aJCBthrottle/controller-motor driver entry. HitachiYA00004270-5 is a controller suffix used inZX330-5G/ZX350-5Greplacement listings. Retain “-5” as part of the complete identity, and record the controller’shardware/software label and plug views.
| Number | Component | Purchase identifier |
|---|---|---|
| KHR1885 | Throttle/controller-motor driver | Driver code and connected throttle motor |
| YA00004270-5 | Hitachi-5Gcontroller entry | Full suffix, hardware/software and plugs |
| VOE14562193 | Volvo pressure/electronics switch | Switch number, connector and pressure function |
| LS52S00015P1 | Kobelco pressure-sensor entry | Sensor range, thread and connector |
YN24S00010P1 is a relay, not a hydraulic valve
The officialCNHYN24S00010P1 entry is a24Vrelay with five spade terminals. Coil voltage and terminal arrangement describe its electrical purchase; contact-rating and wiring diagram complete the relay specification.
Programming and calibration belong with the selected board
A replacement board can be supplied as hardware only or with a selected program. Record the hardware number, software version, machine/engine configuration and requiredsetup in the order. A sensor purchase instead uses its measurement range, signal type, connector and process connection.
Buying questions
Can a suffix be dropped from a controller number?
The suffix can identify a hardware or software variant. KeepYA00004270-5as the complete controller identity.
IsKHR1885an engineECU?
It is a throttle/controller-motor driver entry. The engineECU and display/controlgroup are separate component identities.
IsYN24S00010P1a valve?
It is a24Vfive-spade-terminal relay. It belongs to the electrical switching task.
What belongs on a pressure-sensor order?
The fullnumber, measurementrange, signaltype, connectorpins andthread/process connection define its function and installation.