MR, US and LC describe different machine decisions
In the PC range, compact MR machines and reduced-tail US machines solve different space and reach problems from conventional LC machines. Keep the full suffix and generation on an order: PC200-6, PC200-7 and PC200-8 are separate identities when selecting pumps, cylinders, undercarriage and filters.
Compare the working size before the attachment
Working mass and bucket capacity establish a useful shortlist. Bucket capacity is a range of possible working configurations; the actual order then identifies bucket width, material density, teeth, arm and coupling.
| Full model | Operating weight | Engine power | Bucket range |
|---|---|---|---|
| PC35MR-5 E1 | 3 720 - 3 870 kg | 18.2 kW @ 2 200 rpm | 0.055 - 0.18 m³ |
| PC55MR-5 | 5 150 - 5 270 kg | 28.3 kW @ 2 400 rpm | 0.055 - 0.18 m³ |
| PC130LC-11 | 12 900 - 13 200 kg | 72.5 kW @ 2 050 rpm | 0.26 - 0.60 m³ |
| PC170LC-11 | 17 600 - 19 598 kg | 90 kW @ 2 100 rpm | 0.37 - 0.95 m³ |
| PC220LC-12 | 24,200-24,800 kg | 129 @ 2,000 rpm | 0.50-1.41 m³ |
| PC240LC-11 | 25 294 - 25 574 kg | 132 kW @ 2 000 rpm | 0.58 - 1.42 m³ |
| PC360LC-11 | 35 627 - 36 535 kg | 192 kW @ 1 950 rpm | 0.68 - 1.96 m³ |
PC35MR-5 E1: hydraulic and cylinder details
The PC35MR-5 E1 auxiliary circuit has a 50 L/min maximum at 20.5 MPa. For a small hydraulic hammer or auger, compare that circuit with the attachment’s required flow and operating pressure. A machine’s relief-pressure setting and the attachment’s normal operating pressure perform different roles.
| Cylinder | Bore × stroke × rod | Purchase use |
|---|---|---|
| Boom | 85 × 525 × 50 mm | Cylinder/rod-seal dimensions |
| Arm | 75 × 595 × 45 mm | Arm-cylinder repair identity |
| Bucket | 65 × 490 × 40 mm | Bucket-cylinder repair identity |
PC200 maintenance: identify the generation and location
The existing PC200 parts line includes 20Y-30-00016 bottom rollers for PC200-6 and 22U-30-00021 carrier rollers for PC200-7. Boom kit 707-99-47790 uses 90 mm rod/130 mm bore; arm kit 707-99-57160 uses 95 mm rod/135 mm bore. The position and generation lead to the part rather than one universal PC200 kit.
Make the quotation usable in the workshop
Send the full PC model and generation, the component plate or old part number, location and quantity. For a bucket or ripper, attach pin diameter, pin centres and inside ear width. For a screen or crusher, add material, incoming size and target output. A combined order can include the attachment plus teeth, pins, seals and service filters.
