Lift path and the working job come first
Radial-lift machines move the load through an arc; vertical-lift designs keep the working geometry suited to raised loading. Start with whether the job is ground-level pushing/grading, handling pallets or loading at height. Record attachment mass and load position with the machine’s rated operating capacity.
Wheeled loader working examples
| Model | Rated operating capacity | Operating weight | Power |
|---|---|---|---|
| JCB 250 | 2,235 lb | 7,610 lb | 74 hp |
| JCB 270 | 2,722.7 lb | 8,680 lb | 74 hp |
| JCB 300 | 3,186 lb | 9,288 lb | 74 hp |
| Bobcat Classic S650 | 2,690 lb | 7,901 lb | 74 hp |
One mounting plate, several hydraulic packages
The plate connection is only one part of installation. Record the hydraulic coupler size/type, pressure, available flow, case drain and electrical controls. The Classic S650 has 23 US gpm standard and 30.5 US gpm high flow. The difference can change the working head selected for a trencher, stump grinder or forestry tool.
Put the whole working-tool package in the enquiry
| Working task | Main item | Installation and wear items |
|---|---|---|
| Earth and site work | General-purpose or 4-in-1 bucket | Mount, edge/teeth, cylinder/hoses |
| Post holes | Auger drive and drill | Mount, shaft coupling, drill sizes, teeth |
| Roots, brush and logs | Grapple/rake or cutting head | Couplers, controls, cutting tools |
| Sweeping or snow | Broom, blade or snow blower | Brush/edge, couplers and electrical interface |
Tyres and over-tyre tracks have their own dimensions
Record tyre size, rim dimensions, bolt pattern and the surface the machine works on. An over-tyre track order also needs axle spacing and side clearance. That order is different from a compact-track-loader rubber belt measured by width, pitch and links.
Request a carrier or attachment package
Send the model/serial, lift-path and installed hydraulic option, plate and connector photos, attachment task, quantity and destination. For a repair order, add engine, pump or drive-motor plates and old part numbers. The work package can combine the attachment, consumables and service parts without losing the identity of each line.
