Skid Steer Brush Cutters
Wolverine BC-13-72W — 72-Inch Rotary Brush Cutter
A 776 lb rotary cutter with a 72 inch deck, 66 inch swath, two blades and 14–20 US gpm hydraulic requirement.
66 in
PRODUCT CATEGORY
Skid Steer Brush Cutters
A rotary brush cutter uses blades beneath a deck to cut grass, brush and small woody stems. It is different from a drum mulcher or hammer/flail head. Match effective cutting width, blade assembly and continuous auxiliary flow to the carrier and vegetation.
1 products
Models and component numbers
No matching products.
Send the part number or describe the equipment you need.
Send a sourcing requestDeck width and cutting swath are different
The Wolverine 72 inch deck has a 66 inch cutting swath. Its two bi-directional blades and stump-jumper assembly form the rotary cutting system. Overall deck width controls access and travel coverage; effective swath describes the strip cut by the blades.
| Parameter | 72 inch deck |
|---|---|
| Cutting swath | 66 in |
| Overall deck width | 72 in |
| Weight | 776 lb |
| Auxiliary flow | 14–20 US gpm |
| Blades | 2 |
| Vegetation diameter | Up to 3 in |
Rotary, flail and drum tools leave different results
| Structure | Cutting mechanism | Work output |
|---|---|---|
| Rotary brush cutter | Blades under a broad deck | Cuts standing grass/brush |
| Hammer or Y-flail head | Tools mounted across a rotating shaft | Repeated cutting across a defined swath |
| Drum forestry mulcher | Toothed rotor and countercutting structure | Shreds woody material while working through it |
Build the continuous-drive installation
The brush-cutter motor runs continuously, unlike the short cylinder movement in a grapple. State the flow available at the skid-steer couplers, working pressure, return arrangement and the selected motor connection. The deck, mount and hydraulic connector package are separate components of the installed tool.
Buy blades as the matched rotating set
A replacement set needs blade profile, length, bore, fasteners and the blade-holder/stump-jumper connection. Keep the two-blade quantity and mounting details in the order record. A landscaping work sequence uses the cutter to open the vegetation swath, then a grapple or bucket to move material that needs removal.
Buying questions
Is 72 inches the cut width?
It is the overall deck width for this configuration. The effective cutting swath is 66 inches.
Does standard flow mean any skid steer will run it?
Use the 14–20 US gpm requirement and the selected motor/circuit connections. Standard-flow labels are less precise than the actual auxiliary flow.
What defines the blade replacement?
Blade geometry, bolt/bore connection, quantity and holder arrangement define the replacement set.