Excavator Hydraulic Quick Couplers & Quick Hitches
JXK-06 Hydraulic Quick Coupler / Quick Hitch
P-type quick hitch: 380–420 mm pin centres, 232–315 mm arm width and 220–250 kg weight.
380–420 mm pin centres
Excavator Tiltrotators
engcon EC219 Series 2 — S60 Tiltrotator
EC219 Series 2 serves 14–19 tonne excavators with 45° tilt each way, continuous rotation and a standard S60 lower hitch. Its listed weight is 535 kg and build height 517 mm.
- Model / Part No.
- engcon EC219 Series 2
- Machine / configuration
- 14–19 tonne excavators
- Maximum auxiliary pressure
- 22 MPa
- Recommended bucket width
- 1700 mm
engcon EC219 Series 2 Specifications
| Model / part number | engcon EC219 Series 2 |
|---|---|
| Carrier | 14–19 t |
| Weight | 535 kg |
| Build height | 517 mm |
| Overall length | 737 mm |
| Tilt | 45° each side |
| DC2 / SS10 flow | 120 L/min |
| SS9 tilt / rotation flow | 65 / 70 L/min |
| Maximum auxiliary pressure | 22 MPa |
| Recommended bucket width | 1700 mm |
| Standard hitch | S60 |
Specify EC219 as a system
Write EC219 Series 2, S60 and the selected control system on the purchase list. Add the upper machine connection and the lower tool set. A body-only order does not describe the joysticks, wiring, hoses or hydraulic connections to tools.
Keep the two SS9 flows separate
The SS9 entries are 65 L/min for tilt and 70 L/min for rotation. DC2/SS10 lists 120 L/min for the selected control arrangement. Use the entries for the chosen system rather than combining them into a new flow rating.
Upper mount, S60 tools and controls are three purchase groups
| Group | Selected component | Repeat supply |
|---|---|---|
| Upper interface | Direct or sandwich mounting and machine geometry | Pins, bushes and pickup service parts |
| Tiltrotator | EC219 Series 2; 535 kg; 517 mm build height | Cylinder/rotator seals, bearings and lubrication items |
| Lower tools | S60 buckets, grapple or other tool pickup | Tool-specific cutting/wear parts |
| Controls | Chosen DC2/SS10 or SS9, wiring and hose connections | Connector, hose and control components |
Match the bucket width to the attachment system
EC219 lists a 1,700 mm recommended bucket-width entry. Combine that width with the 737 mm total length and the selected upper mount when drawing the bucket-tip position. A grading bucket, grapple and hydraulic tool each add their own mass and connection route below the tiltrotator.
Purchase Options & Service Parts
Purchase options
- Direct or sandwich machine mounting
- S60 lower hitch
- DC2/SS10 or SS9 controls
- EC-Oil tool-connection option
- Integrated-grapple option and service package
Service & replacement parts
- Tilt-cylinder seals
- Rotator seals and bearings by assembly
- Mounting pins and bushes
- Hoses, connectors and lubrication parts
engcon EC219 Series 2 Buying Questions
Which dimension changes the bucket position?
The 517 mm build height adds an assembly between the excavator and the tool. The upper mounting and lower coupler complete that geometry.
Can I put an S40 bucket directly into S60?
S40 and S60 are different pickup standards. Order the matching lower tools or a specifically dimensioned adapter assembly.
What is the listed EC219 bucket-width entry?
The Series 2 table gives a recommended maximum bucket width of 1,700 mm for EC219.
What should a hydraulic tool below the unit include?
Its S60 pickup, auxiliary connection route, connector ends and control functions belong with the selected tiltrotator system.
Related Products
Excavator Rock Buckets & Hydraulic Tilt Buckets
TB50 1200 mm Hydraulic Tilt Bucket — 5 Tonne Class
1200 mm wide, 0.3 m³, 45 mm pins and 45° tilt to each side for slope finishing.
1200 mm · ±45° tilt
Excavator Rotary Screening Buckets
PAB12-1 Rotary Screening Bucket — 12–17 Tonne Excavators
1020 kg, 1000 mm interchangeable drum and 80 L/min hydraulic flow.
80 L/min · 1000 mm drum