Skid Steer Trenchers
Wolverine 200 mm Chain Trencher — 1,200 mm Depth
The 84-inch table configuration has a 200 mm trench width, 1200 mm maximum depth, 400 mm spoil auger and 404 kg attachment weight.
200 mm
Skid Steer Augers
Wolverine ADB-13-1218R Skid-Steer Auger Drive & Two-Bit Package
ADB-13-1218R is Wolverine’s skid-steer auger drive and bit package. The 370 lb configuration comes with 12- and 18-inch drills, a 2.56-inch round output and an 8–20 US gpm circuit at 3,000 PSI continuous maximum. Effective working depth is 25 inches.
- Model / Part No.
- Wolverine ADB-13-1218R
- Machine / configuration
- Skid steer / compact loader mounting
- Output shaft
- 2.56 in round
- Continuous pressure maximum
- 3000 psi
Wolverine ADB-13-1218R Specifications
| Model / part number | Wolverine ADB-13-1218R |
|---|---|
| Manufacturer SKU | ADB-13-1218R |
| Output shaft | 2.56 in round |
| Package weight | 370 lb |
| Flow | 8–20 US gpm |
| Continuous pressure maximum | 3000 psi |
| Included drills | 12 + 18 in |
| Working depth | 25 in |
Keep the output connection on the order
2.56 inch round describes the connection. It is separate from the 12- and 18-inch drill diameters.
Specify the cutting toolkit
The ground description selects teeth and pilot. List those parts with the drill rather than using a generic auger-spares line.
A pivoting skid-steer frame carries the drive
The mounted assembly hangs the auger drive from a pivot on the skid-steer plate/frame. That frame and drive connection are separate from an excavator pin-mounted auger head. Keep the mount, pivot, drive, hose ends and selected drill on the complete package line.
| Group | Order content |
|---|---|
| Mount | Skid-steer plate/frame and pivoting drive hanger |
| Drive | 2.56-inch round output; 8–20 US gpm |
| Pressure | 3,000 PSI continuous maximum |
| Drill | 12- and 18-inch bits; 25-inch working depth |
| Wear | Pilot, teeth/holders, connection pins and selected fasteners |
Choose the soil-cutting assembly for the hole
For a fencing job, record hole diameter/depth and ground layers, then choose the pilot and teeth for the drill. A second bit diameter is another drill assembly on the same drive purchase. An extension adds reach with the matching round connection; it is a separate component from the gearbox and cutting wear set.
Purchase Options & Service Parts
Purchase options
- Drive, mount and hoses
- 12- and 18-inch drill package
- Ground-specific teeth/pilot
- Extensions with matching round connection
- Wear/service parts
Service & replacement parts
- Teeth and pilot
- Drill connection pins
- Motor/gearbox service parts
- Hoses and fittings
Wolverine ADB-13-1218R Buying Questions
Which pressure is listed?
3000 psi continuous maximum.
Does 370 lb describe head-only weight?
It is the listing’s package weight; the purchase contains drive/mount/drill configuration.
What is included in the mounting choice?
The skid-steer attachment plate/frame, drive hanger and pivot are an independent mounting group beside the drive and drill.
Are both drill sizes included?
The ADB-13-1218R package includes 12-inch and 18-inch drills with the skid-steer drive and mounting frame. Both use the 2.56-inch round output.
Related Products
Excavator Auger Drives & Earth Drilling Tools
BEIYI BY-AD60 Hydraulic Auger Drive — 65 mm Round Shaft
2–6 tonne excavators, 1094–4117 Nm torque and 25–92 L/min flow.
65 mm shaft · 1094–4117 Nm
Skid Steer Stump Grinders
Wolverine SG-13-08D Stump Grinder — 25-inch Wheel
A 608 lb grinder with a 25 inch wheel, 32 carbide teeth, 55 inch swing arc and 8 inch below-ground depth.
25 in